BC Biomedical PS-2200 series User Manual page 22

PS-2200
The rate, amplitude, adult/pediatric, artifact and ST elevation or depression can be selected
by using
to scroll to the desired value. Then
Alternately, to see a submenu of all the options for a highlighted parameter, use
Use to scroll to the desired option. Then
setting.
Auto Rate
If the BPM parameter is set to AUTO, the unit will automatically sequence through all of the
BPM settings, starting with 30 BPM, incrementing at a fixed interval. The interval may be
set in the System Setup Menu under "Auto Step Time".
Displays time (seconds)
remaining before
advancing to next rate.
The key can be used to exit the Auto Mode during the sequence.
NOTE: ST Elevation or Depression is only active in Adult NSR at or below 180 BPM.
to highlight the
20
parameter to change
is used to accept the new setting.
is used to accept the new
and using
.