BC Biomedical PS-2200 series User Manual page 70

Multi-parameter patient simulator
Table of Contents

Advertisement

PS-2200
The display will resemble the following:
MATERNAL
HEART
RATE
30 BPM
40 BPM
45 BPM
60 BPM
80 BPM*
90 BPM
100 BPM
120 BPM
140 BPM
160 BPM
180 BPM
200 BPM
220 BPM
240 BPM
260 BPM
280 BPM
300 BPM
Uniform Deceleration*
Early Deceleration
Late Deceleration
Uniform Acceleration
NOTE: The Transducer Sensitivity (5 mV/V/mmHg or 40 mV/V/mmHg) must be set to
correlate with the monitoring equipment before simulation can begin. (See SETUP for
selection information).
ECG/RESPIRATION/TEMPERATURE
BLOOD PRESSURE
IUP SIMULATION
Next Contraction shows
time remaining in
mm:ss until the next
contraction begins.
NOTE: The time is only
displayed while running
an IUP simulation with
an automatic trigger.
68
FETAL
HEART
RATE
60 BPM
90 BPM
120 BPM*
140 BPM
150 BPM
210 BPM
240 BPM
NOTE: The FHR is only
selectable when not using
the IUP Wave Simulation.
When IUP Simulation is
active, FHR is fixed at a
base rate of 140 BPM and
then varies based on the
IUP wave.
TRIGGER
Manual*
2 Min
3 Min
5 Min
* Indicates Default Setting
(See Power Up Settings)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents