Reading A Memory Card; Saving Registration Data To An Sd Memory Card - Casio CTK-8IOin User Manual

3
Press the [+] (YES) button to start formatting.
• The message "Pls Wait" will remain on the display to
indicate that a procedure is being performed. Never
try to perform any other operation on the keyboard
while the card is being formatted. After formatting is
complete, the keyboard returns to the mode you were
in before you displayed the setting screen.
• To cancel the format operation, press the [–] (NO)
button. This returns to the mode you were in before
you displayed the setting screen.
• If an error message appears on the display, see
"Memory Card Error Messages" on page E-55.
Pressing the CARD button while an error message is
on the display returns to the mode you were in before
you displayed the setting screen.

Reading a Memory Card

1
Press the CARD button to enter the card playback
mode.
Indicator
appears
2
Use the number buttons to input the three-digit
number that corresponds to the SMF data you want
to select.
3
Perform one of the following operations.
I To play back SMF data
3
-1 Press the START/STOP button.
• The keyboard will read the SMF data and play it.
I To use SMF data in a 3-Step Lesson
3
-1 Press the STEP 1, STEP 2, or STEP 3 button.
• The keyboard will read the SMF data and start a
lesson at the step you selected.
• An error message will appear if the selected SMF
data file is larger than about 320 KB.
• If an error message appears, see "Memory Card
Error Messages" on the following page for
information about what you need to do.
• The channel specified as the navigate channel is
assigned to the right-hand part, while the channel
that is one less than the channel specified as the
navigate channel is assigned to the left-hand part.
• Voice Fingering Guide and on-screen fingering
indicators, are not supported for SMF data.
CTK810IN_e_51-56.p65 53
Using a Memory Card
I To evaluate your play using SMF Data
3
-1 Press the SCORING button.
• The keyboard will read the SMF data and enter the
Evaluation Mode.
• An error message will appear if the selected SMF
data file is larger than about 320 KB.
• If an error message appears, see "Memory Card
Error Messages" on the following page for
information about what you need to do.
• The channel specified as the navigate channel is
assigned to the right-hand part, while the channel
that is one less than the channel specified as the
navigate channel is assigned to the left-hand part.
• On-screen fingering indicators are not supported
for SMF data.
4
Press the START/STOP button to stop SMF data play.
Saving Registration Data to an SD
Memory Card
Use the procedure below to save all of the data in the
keyboard registration memory (up to 32 setups) to an SD
memory card. The registration data is saved to a single file.
1
Hold down the CARD button until the card icon
and the message "LoadReg" appear on the display.
L o a d R e
2
Press the CARD button again.
• This will cause "SaveReg" to appear on the display.
S a v e R e
3
Use the number buttons or the [+]/[–] buttons to
select the file number where you want to save the
data.
S a v e R e
Displayed when the file whose number
is selected already contains data.
07.4.10, 3:47 PM
g
g
g *
E-53