Recording Play Along With A Built-In Tune - Casio CTK-8IOin User Manual

Recorded Data Storage
• Anything previously stored in the keyboard is replaced
whenever you make a new recording.
• Recorder contents are retained even when power is turned
off, as long as the keyboard is being supplied battery or
AC adaptor power. If you remove the batteries or should
the batteries go dead while the keyboard is not being
supplied power by the AC adaptor, recorder contents will
be deleted. Be sure to supply power to the keyboard with
the AC adaptor when replacing batteries.
• Turning off the keyboard while a record operation is in
progress causes the contents of the area you are currently
recording to be lost.
CASIO COMPUTER CO., LTD. assumes no responsibility
for any loss or damage to you or any third party arising
out of the loss or corruption of data.
Recording Play Along with a Built-
in Tune
You can use the lesson recording procedure to record notes
you play along with one of the keyboard's built-in tunes.
When you start a lesson recording, the keyboard plays the
song minus the part(s) you selected as the recording part(s),
and indicates the notes you need to play by the on-screen
keyboard guide.
Selecting Parts
Press the part/track button that corresponds to the part(s)
you want to select as the recording part(s).
To select this part:
Left-hand
Right-hand
Both hands
The part that is currently selected is indicated by the part/
track indicators (L and R) that appear on the display as
described below.
CTK810IN_e_36-41.p65
Press this button:
LEFT/TRACK 1
RIGHT/TRACK 2
LEFT/TRACK 1 +
RIGHT/TRACK 2
37
Recording and Play Back
Part/Track Indicators in Recording
Standby
Press the part/track button of the part you want to play on
the keyboard (recording part). This causes its part/track
indicator to flash.
Playback part
(not displayed)
Example: The above indicates the left-hand part is the
playback part, and the right-hand part is the
recording part.
07.4.10, 3:47 PM
Recording part
(flashing)
E-37