Download Table of Contents Print this page

Voice Fingering Guide; Using The Metronome - Casio CTK-8IOin User Manual

Advertisement

Table of Contents

Voice Fingering Guide

Voice fingering guide uses a simulated human voice to call
out fingering numbers during Step 1 and Step 2 one-hand
part practice. If you need to press a key with your thumb, for
example, voice fingering guide says, "One!" In the case of a
chord to be played with your thumb, middle and little finger,
voice fingering guide says, "One, three, five!"
Voice Fingering Guide calls out fingerings only when you do
not press the proper key when you should.
Voice Fingering Guide
One
: Thumb
Two
: Forefinger
Three : Middle finger
Four : Ring finger
Five
: Little finger
To turn voice fingering guide on or off
Press the SPEAK button to toggle voice fingering guide on
(voice fingering guide indicator displayed) and off (indicator
not displayed).
NOTE
• Note that Voice Fingering is disabled in the Evaluation
Mode.
• Exiting the Evaluation Mode automatically restores the
Voice Fingering setting that was in effect when you
entered the Evaluation Mode.

Using the Metronome

The metronome feature of this keyboard produces a bell
sound for the first beat of each measure, followed by click
sounds for each successive beat of the measure. It is the perfect
tool for practicing tunes without accompaniment (rhythm).
To start the metronome
1
Press the METRONOME/ENTER button to start
sounding the metronome.
• This causes "Beat" to appear on the display. Perform
step 2 within five seconds after "Beat" appears.
CTK810IN_e_20-27.p65
Indicator
appears
27
2
Use the number buttons or [+] and [–] to change
the number of beats per measure.
• You can specify 0, or a value from 2 to 6 as the number
of beats per measure.
B e a t
NOTE
• The bell (indicating the first beat of a measure) does not
sound while 0 beat per measure is specified. All beats
are indicated by a click sound. This setting lets you
practice with a steady beat, without worrying about how
many beats there are in each measure.
3
Use the TEMPO buttons to set the tempo.
• Press
to increase the tempo (make if faster) or
decrease it (make it slower).
Tempo value
NOTE
• While the tempo value is flashing, you can also use the
number buttons or [+] and [–] to input a three-digit value.
Note that you must input leading zeros, so 90 is input
as 090.
• Pressing both the
and
time automatically returns the currently selected rhythm
or tune to its default tempo.
4
To turn off the metronome, press the METRONOME/
ENTER button.
NOTE
• The metronome is disabled whenever you are using Step
1 or Step 2 of the 3-step lesson.
07.4.10, 3:47 PM
3-Step Lesson
to
Flash
TEMPO buttons at the same
E-27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ctk-810in

Table of Contents