Turning Off (Disarming) Your System Under Duress; Disarming Your System Under Duress - Bosch DS7400XiV4-EXP User Manual

DS7400XiV4-EXP | User Guide | 7.0 Emergency Procedures
7.10

Turning OFF (Disarming) Your System under Duress

A Duress PIN (refer to Section 8.0 Personal Identification Numbers (PINs) on page 23 and Section 8.4 PIN Authority
Levels on page 24) is used when someone demands, by threatening your life or well-being, that you turn the system
off. When used, the Duress PIN turns off the system and reports a silent Duress alarm if the system is connected to
a monitoring service. When disarming the system normally, use extreme care when entering your PIN to turn off
the system, so you do not inadvertently enter a Duress PIN.
You can enter the Duress PIN at any keypad, but you cannot disarm the system under duress from a keyfob. In a
duress situation, avoid using a keyfob to disarm the system since this prevents you from notifying the monitoring
service of your need for assistance.
Table 20: Disarming Your System under Duress
Equipment
Text Keypad LED
Keypad
RF3341 Keypad
RF3332/RF3332E,
RF3334/RF3334E
Bosch Security Systems | 6/05 | 4998154961B
Command Sequence What Happens
[Duress PIN][Off] •
•
[Duress PIN][#] •
•
The system appears to disarm
normally.
A Duress Code is sent to your
monitoring service.
The system appears to disarm
normally.
A Duress Code is sent to your
monitoring service.
Not applicable
EN | 22
What To Do
Protect your life and well-
being while awaiting
assistance.
Protect your life and well-
being while awaiting
assistance.