Bosch Security System User Manual page 61

Security System | User's Guide | Part II: System Commands - UNBYPASS A POINT? (COMMAND + 0 + 0)
If you don't know the number of the point you wish to
unbypass, you can view the list of devices that can be
bypassed by pressing the Next> soft key.
Continuously pressing Next>
scrolls through these devices.
When the point text of the point
you wish to unbypass appears,
press the Unbypass> soft key or
the ENTER key.
Bosch Security Systems | 9/04 | 4998122475D
6. One of the following messages displays (FRONT DOOR
is used as an example here):
FRONT DOOR is not bypassed indicates the point is
in the system, and therefore cannot be bypassed.
FRONT DOOR is bypassed. indicates that the point
has already been bypassed.
If the Unbypass> is selected, FRONT DOOR is now
unbypassed displays and indicates the point was
successfully unbypassed.
If a 24 hour or Fire Point is bypassed and you
attempt to unbypass it when it is still faulted, Cannot
unbypass 24hr faulted points will be displayed.
Invalid Point indicates that the device is not assigned
to the area that you are in, or the number that was
entered was not a valid point in the system.
No Additional Points indicates that there are no
points remaining to be unbypassed. (The display will
exit the function and return to idle text.)
61