Perimeter Instant (Command + 2); Turn On The Perimeter With No Delays; Using Perimeter Instant - Bosch Security System User Manual

PERIMETER INSTANT (COMMAND + 2)

Turn On the Perimeter With No Delays

Description
Use this function to turn on only the perimeter of your
building, leaving the interior of the building disarmed. This
function allows no exit or entry delay time through the
perimeter, including the designated exit delay door.
This function is useful in residential systems when everyone is
home and ready to retire for the evening. You can have the
security of an armed perimeter, yet move freely throughout
the interior of the premises.
It is also useful in commercial systems when you are working
before or after business hours and wish to have the perimeter
armed. Remember there are no entry or exit delays when you
use this function. You must disarm (turn off) the system to
enter or exit the premises.
Bosch Security Systems | 9/04 | 4998122475D
Security System | User's Guide | Part II: System Commands - PERIMETER INSTANT (COMMAND + 2)

Using Perimeter Instant

1. Interior points are not armed with this command and may
remain faulted while arming with COMMAND 2.
COMMAND
2. Press the
3. The display shows *System
Command*.
4. Press the 2 key.
If you prefer, you may use the Command Menu in
place of steps 2 and 3 to initiate this function.
Press the Menu> key to enter the Command
Menu, then press Next> repeatedly until you
reach the PERIMETR INST ?> prompt. Press the
key adjacent to PERIMETR INST ?>.
key.
38