Bosch Security System User Manual page 58

If you prefer, you may use the Command Menu in
place of steps 2 and 3 to initiate this function.
Press the Menu> key to enter the Command
Menu, then press Next> repeatedly until you
reach the BYPASS A POINT ?> prompt. Then
press the BYPASS A POINT ?> soft key
5. The display shows:
If you know the point number
you wish to bypass, enter the
number and press the Enter>
ENTER
soft key or the
If you don't know the number of the point you wish to
bypass, you can view the list of devices that can be
bypassed by pressing the Next> soft key.
Continuously pressing Next> scrolls through these
devices.
Bosch Security Systems | 9/04 | 4998122475D
Security System | User's Guide | Part II: System Commands - BYPASS A POINT? (COMMAND + 0)
key.
When the point text of the point
you wish to bypass appears,
press the Bypass> soft key,
ENTER
or the key.
58