Burglary Alarms; Silencing Burglary Alarms - Bosch Security System User Manual

Burglary Alarms

Burglary alarms are the second priority. When a burglary
point activates while your system is armed, your keypad emits
a steady high-pitched burglary tone. The tone sounds for the
time set by your security company.
The keypad display shows the number of burglary points
activated, the message Enter Passcode + ENTER key to
Silence" and then custom text for each activated point
If there is more than one point causing an alarm, the display
will show each point for three seconds before showing the
next one. When the last alarm is shown, the next display is the
first one.

Silencing Burglary Alarms

Entering a personal passcode with the proper authority level
silences a burglary alarm and disarms the system if it was
armed.
Bosch Security Systems | 9/04 | 4998122475D
Security System | User's Guide | Part I: Security System Basics - Burglary Alarms
The system will now display *Alarm Silenced* and then the
number of points in alarm (### ALARMS) and the custom
text of all the points in alarm, in the order of occurrence will
display.
Entering COMMAND 4 clears the scrolling point text from
the display.
The *Alarm Silenced* message will continue to alternate
with idle text as a reminder that it is still possible to view the
text of the points in alarm by using the View Memory
function (refer to VIEW MEMORY ? (COMMAND + 4 + 0) on
page 43) for more information.
To clear the event memory and remove the *Alarm
Silenced* message from the display, press the Clear
Display> soft key.
The display will show the instructions for clearing the
message. Enter a valid passcode and press the Clear> soft
key.
18