Bosch Security System User Manual page 74

A programmed delay of system alarm response
Entry Delay
that allows you to enter an armed area through
the correct point and disarm the area. If you
don't disarm before the delay time expires, the
system begins an alarm response which may
include reports to the central station.
A programmed delay of system alarm response
Exit Delay
that allows you to exit after arming an area. If
you exit after the delay time expires, an alarm
is triggered. You must disarm the system. If
you don't disarm before the delay time expires,
the system may begin an alarm response
(depending on if any interior points were
armed) that may include reports to the central
station.
A point that is not normal (a door or window is
Faulted
open).
Point
Bosch Security Systems | 9/04 | 4998122475D
Security System | User's Guide | Appendix - Security System Glossary
To turn on (arm) the security system even
Force Arm
though one or more points are faulted. Force
arming bypasses the faulted points.
The security system displays idle text at
Idle Text
keypads when it is not performing a user
requested function. Idle text shows the arming
status of the system.
To turn on (arm) both interior points and
Master
perimeter points.
Arm
A list of functions you execute from a keypad.
Menu
A report your system can be programmed to
Opening
send to the central station indicating that an
Report
area has been disarmed. Opening and closing
reports are commonly used by commercial
accounts.
An arming command that arms only the
Perimeter
perimeter points.
Arm
74