Fire Trouble And Fire Supervisory Events; Silencing Fire Trouble And Fire Supervisory Conditions; Special Fire Trouble And Fire Supervisory Displays - Bosch Security System User Manual

Hide thumbs Also See for Security System:

Table of Contents

Security System | User's Guide | Part I: Security System Basics - Fire Trouble and Fire Supervisory Events

Fire Trouble and Fire Supervisory Events

When a fire trouble or fire supervisory condition occurs, your

keypad emits three warble tones, then a pause (repeatedly).

The system displays the number of fire points that are in a

trouble or supervisory condition.

Pressing COMMAND 4 or Silence> soft key silences and

clears Fire Trouble and/or Fire Supervisory conditions.

In addition to this, entering a personal passcode with the

proper authority level silences a fire trouble and disarms the

control panel if it was armed. Use COMMAND 40 if you

wish to review these cleared troubles.

Bosch Security Systems | 9/04 | 4998122475D

Some systems may be programmed to

automatically re-sound the keypad's trouble tone

after a period of time if the fire trouble or fire

supervisory condition remains. Consult your

security company for further information.

If you silence the keypad or clear a trouble or supervisory

condition for a Fire Point from the display and the fire point

remains in trouble, Fire Trouble or Fire Supervisory appears

in the keypad's display.

They remain in the display until the condition causing the

trouble is cleared.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the Security System and is the answer not in the manual?