Bosch Security System User Manual page 59

Hide thumbs Also See for Security System:
Table of Contents

Advertisement

6. One of the following messages displays (FRONT DOOR
is used here as an example):
FRONT DOOR is not bypassed indicates the point is
not bypassed and the option is given to bypass it. If
Bypass> is pressed, FRONT DOOR is bypassed is
displayed, indicating the point was successfully
bypassed.
FRONT DOOR is already bypassed indicates that
the point has already been bypassed.
FRONT DOOR cannot be bypassed indicates the
system is programmed not to allow that point to be
bypassed.
Invalid Point. Please try again indicates that the
device is not assigned to the area that you are in or an
invalid point was entered.
No additional points indicates that there are no points
remaining to be bypassed.
7. You can return to idle text by pressing the <Exit soft key.
Bosch Security Systems | 9/04 | 4998122475D
Security System | User's Guide | Part II: System Commands - BYPASS A POINT? (COMMAND + 0)
8. If the bypassed point is a 24 hour point, the message
24Hr Point Bypassed begins scrolling in the display. If
the bypassed point is a fire point, the message Fire Point
Bypassed scrolls in the display.
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents