Perimeter Delay ? (Command + 3); Turn On The Perimeter With Delays; Using Perimeter Delay - Bosch Security System User Manual

PERIMETER DELAY ? (COMMAND + 3)

Turn On the Perimeter With Delays

Description
In residential systems this function allows you to only arm the
perimeter and exit through a door programmed for exit delay.
The interior of the building remains disarmed. People or pets
are free to move throughout the interior of the premises.
This function is also useful in commercial systems when you
are working before or after business hours and wish to have
the perimeter armed. Other system users can enter through
doors programmed for entry delay, which will start the entry
delay sounder and countdown.

Using Perimeter Delay

1. Interior points are not armed with this command and
may remain faulted while arming with COMMAND 3.
Bosch Security Systems | 9/04 | 4998122475D
Security System | User's Guide | Part II: System Commands - PERIMETER DELAY ? (COMMAND + 3)
2. Press the COMMAND
3. The display shows *System
Command*.
4. Press the 3 key.
If you prefer, you may use the Command Menu in
place of steps 2 and 3 to initiate this function.
Press the key adjacent to Menu> to enter the
Command Menu, then press the key adjacent to
Next> repeatedly until you reach the PERIMETR
DELAY ?> prompt. Press the key adjacent to
PERIMETR DELAY ?>.
key.
40