Install The Mounting Plate-Poles Larger Than 4.5 Inches In Diameter - Cisco 1240 Hardware Installation Manual

Mounting Instructions
Use a socket wrench to evenly tighten all four carriage bolts to finish installing the mounting plate on
Step 9
the pole.
Figure 5-7
Item
1
2
3
Install the Mounting Plate—Poles Larger than 4.5 Inches in Diameter
To install the mounting plate on a vertical pole that is larger than 4.5 inches (11.4 cm) in diameter, follow
these steps and refer to
What you need
•
•
•
Cisco 1240 Connected Grid Router Hardware Installation Guide
5-10
Mounting Plate Installed on Pole with Clamp Brackets
Description
Pole clamp notch
Carriage bolts (4)
Pole clamps (2)
Figure
Mounting plate and steel straps included in the
BAND-IT tool included in the
Torque wrench
5-8.
"Pole Mount Kit" section on page
"Strap Tool Kit" section on page 5-6
Chapter 5
1
2
3
Mounting the Router
5-2.
OL-26223-04