Cabling Instructions - Cisco 1240 Hardware Installation Manual

Install an External Non-Cisco Module
Figure 13-2
Figure 13-2

Cabling Instructions

This section describes the two cabling procedures. Use the procedure that applies to your installation
configuration:
•
•
Cisco 1240 Connected Grid Router Hardware Installation Guide
13-6
shows all six mounting bosses on the router, and the corresponding dimensions.
Dimensions for Mounting External Non-Cisco Modules
6.8 inches
(17.3 cm)
External Cabling, page 13-7
Internal Cabling, page 13-8
Chapter 13 Installing External Non-Cisco Modules
5.4 in
(13.7 cm)
9.2 in
(23.4 cm)
OL-26223-04