Table of Contents
Advertisement
K2200 Series | User Guide | 5.0
Table 16: System Status – Doors and Alarm Zones
System Parameter
Door States
Doors
Door Alarm States
Emergency Override?
Manual Override?
Timed Override?
Alarm Zone States - Only alarm module Inputs that have been assigned responses are shown.
Isolated?
State
Figure 16: Sample P4 - System Status Printout
Readykey K2200
DATE: 11-11-93
DOOR CONTROLLER : 01
DOOR DOOR NAME
01
FRONT DR IN UNLOCKED
02
ACCOUNTS
03
SALES RECEP LOCKED
04
FRONT DR OUT UNLOCKED
ALARM ZONE STATUS
ZONE NO
1
2
P5 – Transaction Printout
The P5 command prompts you for a date and time range.
Note:
The printout will give all the high priority transactions that have occurred in the date range first, followed by the rest of
the transactions. This may result in a pause between the two parts of the report.
Bosch Security Systems | 7/03 | 17376 v1.1 / 47491C
Displays, Alarms, and Printing
Display Message
UNLOCKED
LOCKED
OPEN
NO ALARM
TAMPER/FORCED
LEFT OPEN
YES
NO
NORMAL
UNLOCK
LOCKED
YES
NO
YES
NO
CLEAR
ALARM
DOOR AND ALARM STATUS REPORT
TIME: 10:24 REQUESTED BY MASTER KEY
STATE
ALARM STATE
NO ALARM
OPEN
FORCED/TAMPER NO
NO ALARM
NO ALARM
ISOLATED?
STATE
YES
INPUT CLEAR
YES
INPUT CLEAR
Description
Door is manually or automatically unlocked, see Override
The door requires a valid key
The door is physically open
No alarm conditions present
A Tamper or Unauthorized Access
Door left open
If doors all doors opened,
Normal condition.
No override active
Door manually unlocked (L Command)
Door manually locked (L Command)
Door opened on a time profile
No active time profile
Isolated, either manually or by a time profile
Zone is active
Input is in its normal condition
Input is in alarm state
PAGE 1
EMERGENCY
MANUAL
OVERRIDE?
OVERRIDE?
NO
NORMAL
NORMAL
NO
NORMAL
NO
NORMAL
EN | 37
TIMED
OVERRIDE?
YES
NO
NO
NO
Advertisement
Table of Contents
