Bosch K2200 Series User Manual page 16

K2200 Series | User Guide | 3.0
ID DOOR 1
The cursor, a flashing underline, marks the
character that will be overwritten by the next key
press.
2. When a valid key is pressed, the new character
will appear on the screen and the cursor will
move to the next position.
ID FOOR 1
3. Continue entering characters, until you have
completed the entry.
ID FRONT DOOR_
Use the left and right keys to move the cursor
within the field. Press [ENT]
You must press [ENT] to save your new
entry. If you do not, when you move to the
next field or press [ESC], your entry will
be lost.
Numeric
These are values or codes such as lock release time,
access code, etc. In this case, you can only enter
numbers (0-9). Each type of entry will have a
maximum and minimum value. If you enter a value
outside the range allowed, the value you entered will
be adjusted to the nearest allowed, e.g. the maximum
value for a lock release time is 255 seconds, if you
enter 300, the value will change to 255 when you
press [ENT].
1. Once you have selected a field to change, use the
alphanumeric keys to enter a new value.
DR1 LRT 5
The cursor, a flashing underline, marks the
character that will be overwritten by the next key
press.
2. When a valid key is pressed, the new character
will appear on the screen and the cursor will
move to the next position.
DR1 LRT 1
3. Continue entering characters, until you have
completed the entry.
DR1 LRT 10
Use the left and right keys to move the cursor
within the field. Press [ENT]
You must press [ENT] to save your new
entry. If you do not, when you move to the
next field or press [ESC], your entry will
be lost.
Options
These are special fields that allow various options to
be set, such as days of the week, etc.
Bosch Security Systems | 7/03 | 17376 v1.1 / 47491C
Administering the System
1. No cursor appears in this type of field. In order
to make changes, press the number
corresponding to the option you wish to change.
In this example, time period days (PR command)
are shown.
F1 DAY --------
2. In this example, to select a day press the
corresponding number to the day of the week,
Mon=1, Tue=2, etc. To deselect an option, press
the number again.
F1 DAY MTWTF---
When you have made your selections, press
[ENT].
There are other types of entry, such as date, time,
manually locking/unlocking doors etc. These will be
described in detail in the relevant sections.
You must press [ENT] to save your new
entry. If you do not, when you move to the
next field or press [ESC], your entry will
be lost.
EN | 16