Installing the 828mkII Hardware
CHAPTER
3
OVERVIEW
Here's an overview for installing the 828mkII:
Connect the 828mkII to the computer.
Make optical and analog connections as desired.
Connect MIDI gear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Connect a controller, synth or control surface.
Connect a footswitch to trigger any keystroke.
An example setup for computer-based mixing/FX.
An example setup for a mixer-based studio.
If you need to resolve the 828mkII with other
devices, make the necessary sync connections.
synchronizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CONNECT THE 828MKII INTERFACE
1 Plug one end of the 828mkII FireWire cable
(included) into the FireWire socket on the
computer as shown below in Figure 3-1.
2 Plug the other end of the FireWire cable into the
828mkII I/O as shown below in Figure 3-1.
Figure 3-1: Connecting the 828mkII to the computer.
17