Cuemix Console Examples - MOTU 828mkII User Manual

CUEMIX CONSOLE EXAMPLES

Figure 13-2 below shows some examples of how
you can use CueMix DSP:
Powered speakers are connected to the 828mkII
■
main outs. Any input can be routed directly to the
speakers.
Microphone input can be routed via CueMix
■
DSP to the effects processor for live outboard
processing during recording. The resulting signal
can be recorded into the computer either wet, dry
or both (via the effects processor return or the
direct mic input).
Figure 13-2: An example setup of a system that takes full advantage of CueMix DSP.
C U E M I X C O N S O L E
The ADAT optical connection provides 8
■
channels of 24-bit digital I/O to the digital mixer
(or 4 channels at 96kHz). Any device connected to
the 828mkII can be routed to/from the mixer with
no latency. Conversely, any mixer channel can be
routed to any device connected to the 828mkII
with no latency.
Another example of ADAT optical connectivity
■
is to use Giga Studio, and use CueMix DSP to route
Giga inputs directly to the powered monitors
connected to the 828mkII for no-latency
monitoring of your Giga tracks.
101