Enable Pedal; Launch Console When Hardware Becomes Available - MOTU 828mkII User Manual

Word Out
The Word Out menu appears when the 828mkII is
operating at a high sample rate (88.2 or 96kHz).
This menu lets you set the word clock output either
to match the current sample rate (System Clock) or
to halve the current sample rate (System Clock ÷ 2).
In the latter case, the word clock output would be
reduced to either 44.1 or 48 kHz.

Enable Pedal

Check the Enable Pedal option if a foot switch is
connected to the 828mkII and you would like to
trigger recording punch in/out (or other software
functions) with it. Use the Set buttons to determine
what keystroke is triggered by the pedal-up and
pedal-down positions. You can assign the pedal to
any two keystrokes you wish. (You are not
restricted to punch in/out.)
Launch console when hardware becomes
available
Check this option if you would like the MOTU
FireWire Audio Console icon to appear in the
application dock as soon as a MOTU FireWire
interface is detected (switched on, plugged in, etc.)
45
M O T U F I R E W I R E A U D I O C O N S O L E ( M A C O S X )