Cuemix Console Examples - MOTU Traveler User Manual

Other HUI-compatible control surfaces
Any control surface that has the ability to emulate a
HUI should be compatible with CueMix Console.
Just add a Mackie HUI to Audio MIDI Setup and
put the control surface hardware into HUI
emulation mode. Consult the manual for the
control surface for details about how put it into
HUI emulation mode.
Other control surface hardware products
If you install other control surface drivers written
for CueMix Console, they will appear as separate
menu items at the bottom of the Control Surfaces
menu, with the same sub-menu items described
above.
Figure 11-7: An example setup of a system that takes full advantage of CueMix DSP.
86

CUEMIX CONSOLE EXAMPLES

Figure 11-7 below shows some examples of how
you can use CueMix DSP:
Powered speakers are connected to the Traveler
■
main outs. Any input can be routed directly to the
speakers.
Microphone input can be routed via CueMix
■
DSP to the effects processor for live outboard
processing during recording. The resulting signal
can be recorded into the computer either wet, dry
or both (via the effects processor return or the
direct mic input).
The ADAT optical connection provides 8
■
channels of 24-bit digital I/O to the digital mixer
(or 4 channels at 96kHz). Any device connected to
the Traveler can be routed to/from the mixer with
no latency. Conversely, any mixer channel can be
routed to any device connected to the Traveler with
no latency.
C U E M I X C O N S O L E