Advanced Menu - Advanced Chipset Setup - NEC POWERMATE CT 815 Service And Reference Manual

Advanced Menu - Advanced Configuration
Menu Item
Try Other Boot Devices
Floppy Access Control
S.M.A.R.T. for Hard
Disks
Boot-up Num-Lock
Boot to OS/2>64 MB
CPU Serial Number

Advanced Menu - Advanced Chipset Setup

Menu Item
USB Function
USB Keyboard/Mouse
Legacy Support
Memory Hole
ClkGen Spread
Spectrum
ClkGen for PCI
Slot/DIMM
Settings (default is bold)
Yes, No
Select Yes to cause the system to try to boot from other boot
devices if there is a boot failure. Selecting No causes the boot to
be carried out from selected devices.
Read-write, Read-only
Select Read-write to allow the diskette drive to have read-write
capabilities.
Disabled, Enabled
Select Enabled to use the Self Monitoring Analysis and Reporting
Technology (S.M.A.R.T.) for reporting a possible problem with an
IDE device. After receiving the warning, the BIOS alerts you to the
problem.
Off, On
Select On to lock the numeric keypad on boot up.
No, Yes
Select Yes to enable a boot to OS/2 if RAM is greater than 64 MB.
Enabled, Disabled
Controls detection of the processor serial number.
Settings (default is bold)
Enabled, Disabled
Select Enabled to enable use of USB functions for USB devices.
Enabled, Disabled
Select Enabled to enable the USB functions for a USB keyboard
and mouse.
15MB-16MB, Disabled
Select Enabled to reserve a space in the memory, between 15 and
16 MB, for certain ISA boards.
Disabled, Enabled
Select Enabled to enable the Clock Generator Spectrum and limit
the risk of electromagnetic emissions.
Disabled, Enabled
Select Enabled to enable the Clock Generator for PCI and DIMM
slots.
System Configuration 2-13