Save/Restore - Multitech FaxFinder FF130 Administrator's Manual

Unless otherwise specified in the table below, you can enter up to 64 characters these fields.
Field
Common Name Enter the Hostname or IP address, depending on which you use to connect to
FaxFinder. The web browser uses this field to check for a valid certificate.
Days Enter up to three digits for number of days that the certificate is valid.
Country Enter the two letter code for the country the certificate is valid for. US is the code
for the United States. To find other country codes, go to
for "country name codes."
State/Province Enter the state or province that the certificate is valid for.
Locality/City Enter the city or locality that the certificate is valid for.
Organization Enter the organization name that the certificate is valid for.
Email Address Enter the email address of the person responsible for the FaxFinder. Typically this
is the administrator. This field may be left blank.
Server Certificate
This section shows the details of the FaxFinder's verification certificate.

Save/Restore

After you configure FaxFinder to work in your environment, create a restore point to save your settings.
This will allow you to easily reset the unit if for some reason you lose your settings or have to restore
factory defaults.
Saving the Configuration
Save Config backs up all current settings into one configuration file.
To save the configuration from the Save/Restore Configuration page:
1.
Click the Save Config link. A file download window opens.
2.
Click Save twice. The configuration restore file name is formatted as config_nnn_date.bin, where n
is the version number.
3.
Click Close when the download is complete.
FaxFinder Administrator User Guide
Chapter 3: FaxFinder Web Management Interface
Description
www.iso.org and search
41