Replacing The Battery - NEC SX Service And Reference Manual

T
Keep the battery out of the reach of children.

Replacing the Battery

Replace the battery pack installed in your NEC Versa SX system as follows.
Note:
for which they are designed. Also, installing another
manufacturer's battery, or using a combination of very old
and new batteries can deteriorate battery and equipment
performance.
1. Save your files and press the
off system power.
2. Close the LCD and turn the system over.
3. Slide and hold the battery latch and lift the edge of the battery out of the
notebook as shown below.
4. Insert the new battery as follows:
T
Locate the alignment groove tabs on the end of the battery opposite the
terminals.
T
Locate the alignment grooves inside the battery bay at the end opposite
the terminals.
T
Fit the battery alignment tabs into the grooves inside the bay.
Use the batteries in the NEC Versa SX computer
and
Fn
Removing battery
A - Battery Release Latch
button to suspend to disk, or turn
Power
System Configuration and Setup 2-7