Keyboard - NEC SX Service And Reference Manual

Note:
removing the device, the device casing catches on the inside
of the latch.

Keyboard

Use the following steps to remove the keyboard and access the dip switches.
1. Open the LCD panel.
2. Locate and remove the rubber cap (if present) and the Phillips-head screw on
the upper left hand corner of the keyboard cover of the NEC Versa.
3. Press down using a slight pressure on the right hand side of the keyboard
retainer and slide to the left.
4. Gently lift up the edge of the keyboard nearest the LCD and slide the
keyboard toward the LCD screen to release the tabs that secure it.
If you release the latch before completely
Locating the rubber cap
Keyboard retainer
Disassembly and Reassembly 3-5