Replacing The Battery - NEC TCM380 Quick Start Manual

24 - TCM380 Quick Start Guide

Replacing the Battery

Handling the Battery
Review the following before handling the system battery and read the section about "Battery Pack",
page 21.
Caution: Use the battery only in the Thin Client for which it is designed. Mixing other system's
batteries, other manufacturer's batteries, or using a combination of very old and new batteries can
deteriorate battery and equipment performance.
Warning: To prevent accidental battery ignition or explosion, adhere to the following:
• Keep the battery away from extreme heat.
• Keep metal objects away from the battery terminals to prevent a short circuit.
• Make sure the battery is properly installed in the battery bay.
• Read the precautions printed on the battery.
Installing the Battery in your System
Caution: Be sure to save your data before replacing the battery pack or connecting the AC adapter.
Failure to do so can result in data loss.
1. Save your files, exit all applications, and turn off system power.
2. Close the LCD panel and turn the system over.
3. Slide the battery release latch to the unlock position until the battery pack extracts automatically
from its compartment.