Pc Card Assembly; Microphone; Reassembly - NEC SX Service And Reference Manual

PC Card Assembly

1. On the underside of the main board remove four screws (
2. Turn the main board over and disconnect the PC card assembly from the
main board.

Microphone

1. Turn the main board over; disconnect the microphone cable at P4.
2. Remove the microphone by sliding away from the main board.
This completes the disassembly process.

Reassembly

Reassembly is the reverse of the disassembly process. Use care to insure that all
cables and screws are returned to their proper positions.
3-14 Disassembly and Reassembly
PC Card Assembly
A – Screws
).
A