NEC SX Service And Reference Manual page 42

T
Power Savings Level — Lets you choose one of four levels of power
management.
T
LCD Suspend — Allows you to suspend/resume when the LCD panel is
opened and closed.
T
Suspend Option — Allows you to specify either Suspend or Save to File
(STF) as the default power management mode. In Suspend, after a
specified amount of inactivity, your NEC Versa shuts down all devices as
you specified in Power Management Setup or applies default timeouts.
All your data is automatically recovered from where you left off when
you Resume.
T
Auto Save To File — After 30 minutes in Suspend mode the current file
is automatically saved to a special file on the hard disk and the system
shuts down. To resume, you must press the power button. The system
reads the saved file and sets up your system accordingly.
If Auto Save to File is set to Off and HDPREPEZ is present, pressing the
Fn-Power/Sleep
T
Panel Brightness — Lets you select the LCD screen backlight intensity.
T
Suspend Warning Tone — Specifies whether the system warning tone
sounds when Suspend mode starts. It is best to keep this option enabled.
2-20 System Configuration and Setup
High Perform provides the greatest system performance with only
minimal power conservation.
Longest Life provides the maximum amount of power savings.
Off disables power management and all device timeouts.
Custom lets you define your own power management configuration
by selecting values for specific device timeouts. Custom lets you set
the following timeouts.
– Hard Disk Timeout — Allows you to select the amount of time
before your hard disk shuts down.
– Video Timeout — Allows you to select the amount of time
before your video shuts down.
– Peripheral Timeout — Lets you choose the amount of time
before your peripherals are controlled by power management.
– Audio Device Timeout — Selects the amount of time before your
audio device shuts down.
– Standby Timeout — Allows you to select the system standby
timeout period.
– Auto Suspend Timeout — Defines how much time elapses
before the system automatically enters Suspend Mode.
key combination puts the system into Save to File mode.