Dip Switch - NEC SX Service And Reference Manual

Dip Switch

1. Locate the dip switch block. See the figure below.
2. Using a fine-tipped object, change the appropriate switch to the required
setting. See "Switch Settings" for dip switch functions and settings.
Never use a pencil to change switch settings. Residue from
the pencil can damage the system.
Switch Settings
A four-position dip switch is located underneath the keyboard. The following
list identifies each switch setting and its function.
T
Switch 1, Password Override Switch — The default setting is "OFF." If
you forget your password and cannot access the data on your NEC Versa,
change the setting to "ON" and your current password dissolves.
T
Switch 2 — Keyboard select; Default is "ON" for U.S. 85 key keyboard.
T
Switch 3 — Reserved for factory use; Default is "OFF."
T
Switch 4 — Reserved for factory use; Default is "OFF."
Dip switch location
! CAUTION
Disassembly and Reassembly 3-7