Thread Tension Control; Step Stitch-By-Stitch Control; Go To Stitch; Return To Embroidery Edit - Viking Designer Ruby User Manual

THREAD TENSION CONTROL

When embroidering with specialty thread or fabric you may
need to adjust the thread tension to achieve the best result.
Thread tension can be adjusted up or down using the + and
the - on the thread tension control.

STEP STITCH-BY-STITCH CONTROL

Touch + to step forward and - to step backwards stitch by
stitch. Use the - icon to move backwards a few steps after
the needle thread breaks or runs out. Touch & Hold to
move through the stitches more quickly. The cursor on the
screen will follow the stitches in the embroidery eld.

GO TO STITCH

To go to a particular stitch within the color block, touch in
the center of the Step Stitch-by-Stitch control. A pop-up
message will appear, where you can enter the stitch number.
Step Stitch-by-Stich will then move to that stitch number.
If the number entered is too large, the machine will move
to the last stitch in the color block.

RETURN TO EMBROIDERY EDIT

Touch this icon to return to Embroidery Edit and
make adjustments to your design(s) before you start
embroidering. A pop-up message will appear asking if you
want to return to Embroidery Edit because any changes
made in Embroidery Stitch-Out will be lost.
Thread tension Step stitch-
by-stitch
Go to stitch
Return to
Embroidery
Edit
8:8