Sewing Settings; Twin Needle; Selective Thread Cutter Auto - Viking Designer Ruby User Manual

SEWING SETTINGS

Twin Needle

Touch the Twin Needle icon to open a list for twin needle
width selections. When a twin needle size is selected, the
width of all stitches is limited for the selected twin needle
size to prevent needle breakage. The setting is kept until you
deselect the twin needle width.
When a twin needle size is selected, a pop-up message is
shown when turning on your machine. Another warning
pop-up message is shown when selecting a stitch that is too
wide for the selected twin needle size. The stitch width of
those stitches is automatically adjusted to t the twin needle.
Deselect Twin Needle to go back to normal sewing.
Stitch Width Safety
Select the Stitch Width Safety function when using a straight
stitch needle plate or a straight stitch presser foot. The needle
position is locked to center for all stitches to prevent damage
to the needle, presser foot or needle plate.
When turning on the machine with this setting activated and
for every stitch selection that is not a straight stitch, a pop-up
message informs you that it is set to straight stitch. Deselect
Stitch Width Safety to go back to normal sewing.
Note: Twin Needle and Stitch Width Safety cannot be used at the same
time.

Selective Thread Cutter Auto

To activate the function select the Selective Thread Cutter
Auto in the Sewing Settings. The threads are cut automatically
and the presser foot raises at color changes, when an
embroidery is nished or when you have completed a
buttonhole. When deselected, no Selective Thread Cutter
Auto will be performed.
3:6