To Program In Sewing Mode; To Program In Embroidery Edit; Edit Your Stitch Or Lettering Program - Viking Designer Ruby User Manual

TO PROGRAM IN SEWING MODE

• Enter the Program window, touch the PROG icon.
• Touch the Stitch or Font Menu to open the stitch or a font you wish to use.
• The active position is marked by a cursor and the selected stitch or letter will be marked in red. Inserted stitches will
be placed at the cursor. Only the selected stitch can be adjusted. Move the cursor through the stitch program using the
scroll.
• To close the Program window and sew your programmed stitch, touch the OK icon or just press the foot control.

TO PROGRAM IN EMBROIDERY EDIT

• To enter the Program mode in Embroidery Edit, touch the Start Menu icon to foldout the Extended toolbar.
• Touch the Stitch or Font Menu to open stitch menu or a font you wish to use.
• The active position is marked by a cursor and the selected stitch or letter will be marked in red. Inserted stitches will
be placed at the cursor. Only the selected stitch can be adjusted. Move the cursor through the stitch program using the
arrows.
• To close the Program window and embroider your Stitch program, touch the OK icon.
To Edit a Programmed Stitch in Embroidery Edit
If you want to edit an already programmed stitch select the stitch and touch the Edit Stitch Program icon and you will
enter the Program window again.
Note: If you have selected tapering in the stitch program, it will be converted to a design when loaded to Embroidery Edit, and cannot be opened
for editing again.

EDIT YOUR STITCH OR LETTERING PROGRAM

Insert a Stitch or Letter
Move the cursor where you want to add a stitch or letter. Select the desired stitch you want to insert. It will be placed at the
cursor.
Adjust Text and Stitches
You can mirror, adjust length and width or change the density of the selected stitch, in the same way as when in Sewing
Mode.
Delete a Stitch or Letter
If you want to delete a stitch, move the cursor to the stitch you want to delete (the selected stitch will be red) and touch the
Delete icon. Use the Touch & Hold function to delete the entire program.
Duplicate a Stitch or Letter
To duplicate a stitch, move the cursor to the stitch you want to duplicate (the selected stitch will be red). Touch the
Duplicate icon to copy the selected stitch.
Note: Make your adjustments on the stitch before duplicating and the copied stitch includes the adjustments.
Use the Touch & Hold function to bring up a pop-up message where you can enter the exact number of copies you want
to insert.
Replace a Stitch or Letter
To replace a stitch, simply select it (using the arrows to select the stitch you wish to replace) and touch Delete. Insert the
new stitch. It will be placed at the cursor.
Zoom to All
If the stitch or stitch program is wider than what can be shown on the screen, you may use the Zoom to All
icon to see the entire width of the stitch program.
Note: Zoom to All is only visible if the stitch or stitch program is wider than the stitch eld.
P 5:3
ROGRAM