Viking Designer Ruby User Manual page 9

Edging Foot J
This foot is used for overcasting and seam/overcasting, with stitches that have a stitch width
of 5.0 and 5.5 mm. Stitches form over the pin which prevents puckering at the edge of the
fabric.
Quilter's 1/4" Piecing foot P
This foot is used when piecing quilt blocks. The foot has distance guidelines marks 1/4"
(6 mm) and 1/8" (3 mm) from the needle.
Embroidery/ Darning Foot R
This foot is used for free motion embroidery/quilting/stitching and hoop embroidery.
Side Motion Foot S
7
This foot is used for side-motion/Omnimotion stitches.
Decorative Stitch Foot B Transparent
7
A clear foot for decorative sewing ma kes it easy to match stitches. Same tunnel on the
underside as Presser Foot B.
Sensor One-Step Buttonhole Foot
Plug into the machine then enter the desired buttonhole length to sew Sensor One-Step
7
Buttonholes. The middle mark measures a 5/8" (15 mm) from fabric edge.
Self-Adhesive Glide Plates
Used for Presser Foot C/Sensor One-Step Buttonhole Foot when sewing buttonholes on
plastic-coated fabrics, leather, etc.
G 1:9
ETTING TO KNOW YOUR MACHINE