System Disarmed - NAPCO FREEDOM F-64TP Operating Manual

Please note the following information when the system is disarmed:
SYSTEM READY
STATUS
DISPLAY
OPEN ZONES Y/N
6
S Y S T E M D I S A R M E D
When the system is disarmed, the premises is NOT protected from intruders--but the keypad
alarm buttons FIRE, AUX, and POLICE are ALWAYS active (as are any other "24 hour" devices
that the installer provided for your system). See page 16 for more information regarding these
Emergency Buttons.
When all perimeter zones (except the local exit/entry door) are secure, the arming sequence can
be started by pressing STAY or AWAY. The green STATUS light must be on steady and the
LCD window will display "SYSTEM READY". If the local exit/entry door is open or unlocked, the
second line of the LCD will scroll between the date / time display and "DOOR UNLOCKED".
When the system is NOT ready to arm, the green STATUS light will be off and the LCD window
will scroll "SYSTEM NOT READY" followed by all faulted perimeter zones and open/unbolted doors,
including the local exit/entry door.
To prevent confusion during arming, interior zones (such as motion sensors, trip beams, etc.), do
not scroll on the Touchpad LCD window when activated. The status of all zones (including the
interior zones) can be displayed in the LCD window by answering YES to the "DISPLAY OPEN
Y/N" Touchpad Menu Mode function (see Touchpad Menu Mode, page 21).
ZONES