Table of Contents
Advertisement
B Y P AS S I N G U S I N G T H E Z O N E D I R E C T O R Y
Bypassing using the Zone Directory allows you to scroll through a list of all zones in your system and manually select which
zone to bypass. These "faulted" zone(s), may be temporarily removed from the system ("bypassed"). Warning: Bypassed
zones are unprotected--have the system checked and repaired as soon as possible.
1
Press the BYPASS button. The LCD window will
BYPASS
read "DISPLAY ZN DIRECTORY Y/N".
2
Press YES. The Zone Directory will display, starting with zone 1. Press YES to scroll up and press
YES
NO to scroll down through the list of zones. When the zone you wish to bypass appears on the LCD win-
dow, press BYPASS and the Bypass icon will appear for each bypassed zone listed.
3
With the selected perimeter zone now bypassed, you can now proceed with either arming Stay or
Away, as desired. Press RESET, allowing the LCD window to read "SYSTEM READY". Then press
STAY or AWAY and lock the deadbolt to arm the system with the faulted zone(s) bypassed.
WARNING: When bypassing a monitored door, be aware that the bypassed door is temporarily removed from the system
and will not send a disarm signal to the Touchpad when unlocked, and false alarms may result. Therefore, an I-FOB MUST
be used to disarm when entering through a bypassed monitored door.
" Display Zone Directory ?"
Press YES to select or
MENU to skip"
15
Advertisement
Table of Contents
