Arming And Leaving With A Faulted Zone - NAPCO FREEDOM F-64TP Operating Manual

AR M I N G AN D L E AV I N G W I T H A F AU L T E D Z O N E
You want to arm and leave the premises, but wish to intentionally leave a window open. Or perhaps a door deadbolt is bro-
ken and is unable to be quickly repaired and locked. These "faulted" zone(s), may be temporarily removed from the system
("bypassed"). Warning: Bypassed zones are unprotected--have the system checked and repaired as soon as possible.
1
Press the BYPASS button. The LCD window will read
BYPASS
"DISPLAY ZN DIRECTORY Y/N".
2
YES
Press NO and the next menu selection "BYPASS ALL OPEN ZONES Y/N" appears. Press YES to bypass
all open perimeter zones (excluding the primary exit/entry door).
NO
3
BYPASS
SYSTEM READY
Press AWAY, open the door and exit.
4
Lock the deadbolt to arm the system with the faulted
zone(s) bypassed.
indicate the system is armed.
Warning: Bypassed zones are unprotected--have the system checked and repaired as soon as possible.
Note: If you lose your deadbolt key, see page 24 for activating a special "Lost Key Mode".
The Touchpad will sound one chirp to
"Display Zone Directory?"
Press YES to select or
MENU to skip"
"Exit and lock door
to arm system"
13