Enter Zone Descriptions -- "Cell Phone Style - NAPCO Security Command Center Operating Manual

Programming Zone Descriptions
The zone descriptions which appear on the keypad display may be programmed in the User Program Mode.
A C T I V A T E
P R O G R A M
0 1 - F R O N T D O O R
CELL PHONE-STYLE ENTRY
CHARACTERS HOLD
G
PRESS DISPLAYED
IN SEQUENCE
AND
PRESS
1 1
ABC1
2 2
DEF2
3 3
GHI3
4 4
JKL4
5 5
MNO5
6 6
PQR6
7 7
STU7
8 8
VWX8
9 9
YZ90
0 0
(SPACE) • - .
( ) , / : ? #
24
P R O G R AM M I N G ( O P T I O N A L )
Enter the User Program Mode
1.
Enter your User Code, then press R to enter the Function Mode.
Y / N
2.
Answer NO (press Q) until "ACTIVATE PROGRAM Y/N" is displayed, then
press YES (P).
3.
"ENTER USER CODE" will display, press NEXT (P) and the keypad will
display the Zone 1 Description.
Entering a new zone description (Cell Phone-Style Entry)
•
Use buttons R and B to move the cursor under the letter to be changed.
CHARACTERS
DISPLAYED
•
Press 0 through 9 and G to select letters. The first press will display the
IN SEQUENCE
first character, the next press will display the next character. See the table at left
abc1
and page 25 for more information.
def2
•
Use buttons R and B to move the cursor as needed. Press
ghi3
jkl4
To advance to the next zone (or to any other zone):
mno5
•
Move the cursor to the displayed zone number (i.e., "01") using R and B.
pqr6
stu7
•
Change the zone number using keys 0 through 9. Enter two digits for the
vwx8
zone number (after entering the first digit, the cursor will automatically advance to
yz90
the second digit). When the second zone number digit is entered, the cursor will
(Reserved)
automatically advance to the right, allowing the description locations to be entered.
•
Always press
U
to save each zone description.
U
to save.