Before Operating; Getting Started; Clock Setting; Stop/Clear - Sharp Carousel R-350E Operation Manual And Cookbook

BEFORE OPERATING

* This oven is preset with the INFORMATION GUIDE.
To assist you in operating your oven useful information will appear on the display.
In this manual, the display of information guide is abbreviated.

Getting Started

Step
Plug the oven into a power point and switch
1
on the power.
Ensure the oven door is closed.
Press the STOP/CLEAR pad so that the
oven beeps.
2

Clock Setting

* To enter the present time of day 11:34 (AM or PM).
Step
Press the CLOCK pad.
1
Enter the correct time of day by press-
ing the numbers in sequence.
2
Press the CLOCK pad again.
3
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45) ERROR will appear in the
display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).
If you wish to know the time of day during the cooking or timer mode, press the CLOCK pad. As long as your
finger is pressing the CLOCK pad, the time of day will be displayed.

Stop/Clear

Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
3. Clear the message on the display after cooking.
To Cancel a Programme During Cooking
Press the STOP/CLEAR pad twice.
Procedure
Procedure
Pad Order
STOP
CLEAR
Pad Order
CLOCK
CLOCK
6
Display
SHARP, MICRO-WAVE,
OVEN will be displayed
repeatedly.
3 : 0 0
1 2 3 4 5 6 7 8
Only the dots will remain.
Display
E N T E R
T I M E
1 1 : 3 4
1 2 3 4 5 6 7 8
The dots (:) will flash on and
off.
1 1 : 3 4
1 2 3 4 5 6 7 8