Audio/Mic [2/2] Menu Screen - JVC GY-HD110 Instructions Manual

AUDIO/MIC [2/2] Menu Screen

In VTR mode, the screen changes to the AUDIO menu screen.
Item
AUDIO MONITOR Selects whether stereo or mixed audio is output from the PHONES jack when the MONITOR SELECT switch is set
to BOTH.
STEREO
* Outputs only the CH-1 audio from the monitor speaker.
MIX
FAS AUDIO Selects the recording level adjusting method for FAS (Full Auto Shooting). (CH-1, CH-2)
AUTO
SW SET
X See "2 [CH-1/CH-2 AUDIO SELECT] switch" on page 13.
X See "h [FULL AUTO] switch" on page 18.
SEARCH AUDIO [DV] Selects whether to output audio when searching a tape recorded in DV format. (This also includes slow playback.)
ON
OFF
PB AUDIO CH [DV] Selects which channel audio to output when playing back a DV tape with the audio signal recorded in 4 channels.
(Can only be set in VTR mode)
CH1/2
MIX
CH3/4
MEMO
This camcorder does not have a function for dubbing to the CH-3 and CH-4 channels.
PAGE BACK When the cursor is in this position, press the SHUTTER dial to the AUDIO/MIC [1/2] menu screen.
Function/Setting (bold characters indicate initial settings)
: Stereo audio (CH-1 audio is output to L and CH-2 audio is output to R)
: Mixed audio (CH-1 and CH-2 mixed audio is output to L and R)
: Sets to AUTO.
: Follows settings for the AUDIO SELECT switch.
: Audio is output.
: Audio is not output.
: Outputs the CH-1 and CH-2 channel audio.
This camcorder records the audio in CH-1 and CH-2 while shooting.
: Outputs all 4 channels of audio at the same time.
: Outputs the CH-3 and CH-4 channel audio.
MENU SCREENS
73