Dubbing With Av Devices - JVC GY-HD110 Instructions Manual

Dubbing with AV Devices

1.
Composite cable
or
Component cable
IEEE 1394
HDV
DV
LINE
OUTPUT
connector
1.
Audio cable
Clamp filter
4.
VIDEO FORMAT menu screen
5.
AUDIO menu screen
Signal flow
Recording unit
Signal flow
USING EXTERNAL COMPONENTS
By connecting the video signal output terminal and the LINE
OUTPUT terminal on this camcorder to an AV device, analog
signal dubbing is possible.
1.
Connect the cables.
Use the provided cable for the audio cable.
To reduce the emission of unwanted radio waves, be sure
to attach the provided clamp filter as shown in the figure
on the left.
• Attach the clamp filter as close to the camcorder as
possible, as shown in the figure.
2.
Turn both devices on.
3.
Set the camcorder to VTR mode.
Press the CAM/VTR button. The VTR indicator lights.
4.
Set the video output.
Set the VIDEO FORMAT menu screen. X See page 64.
• HDV PB OUTPUT item:
Set the video format to be output from the video output
terminal during tape playback.
• PB TAPE item:
Select whether to automatically detect the playback tape
video format or play back only a particular format.
Normally, use the "AUTO" setting.
• OUTPUT TERMINAL item:
Set either component or composite output.
Normally, use the "AUTO" setting.
5.
Set the audio output. X See page 55.
Set the AUDIO/MIC menu screen. X See page 72.
• AUDIO MONITOR item:
Set stereo audio or mixed audio.
• PB AUDIO CH [DV] item:
Set the audio channel to be output.
• Set the MONITOR SELECT switch.
6.
Insert the videocassettes.
GY-HD110 : Insert the recorded videocassette.
Recording unit : Insert the videocassette to be
dubbed to.
7.
Press the PLAY/STILL button on the GY-HD110 to start
playback.
8.
Start recording on the recording unit.
For details, see the instructions to the unit used for
recording.
9.
When dubbing is completed.
Stop recording on the recording unit, and then press the
STOP button on the GY-HD110 to stop playback.
57