Overload Protection - AEG Protect 1. M Operating Instructions Manual

Overload Protection

11.6
Operating LED indications
status /
Operating
problems
Overload in
normal operation
UPS warning
Overload in
normal operation
> Switchover
Overload in
battery operation
UPS warning
Overload in
battery operation
> switch-off
Overload in
bypass
operation
Note: = LED lights up
= LED flashes
If you cannot solve the problem that has occurred, stop the entire
procedure, switch off the UPS and disconnect the UPS from the
mains. Please contact our hotline in this case (see page 5).
Please have the serial number of the unit as well as the
purchase date at hand. The hotline will provide you with technical
support and can inform you about further procedures once you
have described the problem.
Warning LC displays
signal
1 acoustic
"Output
signal
overload"
every 2 s
Continuous "Output
warning overload"Alarm
signal code: 46
1 acoustic
"Output
signal
overload"
every 2 s
Continuous
"Output overload"
warning
Alarm code: 46
signal
1 acoustic
"Output
signal
overload"
every 2 s
47
Notes
Reduce the load
Reduce the load
Reduce the load
Reduce the load
Reduce the load