Qualified Personnel; Safety Instructions For Protect 1.M - AEG Protect 1. M Operating Instructions Manual

♦ Disconnect the unit from the power supply
♦ Secure the unit against being switched back on
♦ Verify that the unit is disconnected from the power
♦ Earth and short-circuit the unit
♦ Provide protection by covers or barriers for any

Qualified Personnel

3.3
The PROTECT 1.M may only be transported, installed,
connected and serviced by qualified personnel who are familiar
with the pertinent safety and installation regulations. All work
performed must be inspected by responsible qualified
personnel.
The qualified personnel must be authorised by the responsible
safety officer of the installation to perform the work required.
Qualified personnel is defined as personnel
♦ having completed training and gained experience in the
♦ familiar with the pertinent standards, rules and
♦ having received instruction on the mode of operation
♦ capable of recognising and preventing dangers.
Regulations and definitions for qualified personnel can be
found in DIN 57105/VDE 0105, Part 1.

Safety Instructions for PROTECT 1.M

3.4
supply
neighbouring live parts
respective field,
regulations and accident prevention regulations,
and operating conditions of the PROTECT 1.M,
The UPS is live, and the voltage can be
dangerous. The unit may only be installed and
if necessary opened by trained and qualified
personnel. Repairs may only be carried out by
qualified customer service staff!
15