Before First Use - AEG 47056VS User Manual

www.aeg.com
8

BEFORE FIRST USE

WARNING!
Refer to "Safety information"
chapter.
INITIAL CLEANING
• Remove all accessories and removable
shelf supports (if applicable).
• Clean the appliance before first use.
Refer to the chapter "Care and
cleaning".
SETTING THE TIME
You must set the time before you
operate the oven.
When you connect the appliance to the
electrical supply or after a power cut, the
indicator for the Time function flashes.
Press the + or - button to set the correct
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
When you change the time, you
must not set the Duration
End
To use the appliance, push the knob. The
knob comes out.
PREHEATING
Preheat the empty appliance to burn off
the remaining grease.
1.
Set the function
temperature.
2. Let the appliance operate for one
hour.
3.
Set the function
temperature.
function at the same time.
and the maximum
and the maximum
4. Let the appliance operate for ten mi-
nutes.
5.
Set the function
temperature.
6. Let the appliance operate for ten mi-
nutes.
Accessories can become hotter than usu-
ally. The appliance can emit an odour and
smoke. This is normal. Make sure that the
airflow is sufficient.
or
and the maximum