Before Using For The First Time; Control Panel - AEG VS92903M User Manual

ENGLISH
7

4. BEFORE USING FOR THE FIRST TIME

WARNING!
Ensure oil has been added before
operating the appliance. Refer to
Installation section for how to do this.
WARNING!
Refer to the chapters on safety.
4.1. Cleaning for the first time
 Remove all the parts from the
appliance.
 Clean the appliance before you use
it for the first time.
Refer to the "Cleaning and
maintenance" chapter.
4.2. First connection
 Connect the appliance to the power
supply.

5. CONTROL PANEL

ON/OFF switch
ON/OFF LED
Vacuum function LED
Sealing function LED
Air return function LED
Stop button
 Use the ON/OFF switch
the left of the control panel to
switch the appliance on.
 Before using the appliance, proceed
with the "Conditioning Program"
as shown below:
 Close the cover with the empty tank.
Select program P7 using the keys

-9- and -10-.

 Press Start
 Wait for the cycle to end (about 3
minutes).
 At the end of the cycle, the display
shows P7 again.
 Now the machine is ready for use.
Selection button
Start button
"DECREASE" button, reduces the set function
values and selects the programs
"INCREASE" button, increases the set
Function values and selects the programs
Display. Displays the selected functions and
the relative setting data.
locate to
-1-
-8- .