Waveform:segments; [:State] - Agilent Technologies N5171B Command Reference Manual

"SEQ:filename" This variable names a sequence file residing in the catalog of sequence files. For
more information on the file name syntax, see
Example
:RAD:ARB:WAV:NHE "Test_Data"
The preceding example selects the file Test_Data, without applying header settings.

:WAVeform:SEGMents

Supported N5172B/82B
[:SOURce]:RADio:ARB:WAVeform:SEGMents?
This command returns the segment count in the currently selected waveform sequence for Dual Arb.

[:STATe]

Supported N5172B/82B
[:SOURce]:RADio:ARB[:STATe] ON|OFF|1|0
[:SOURce]:RADio:ARB[:STATe]?
This command enables or disables the arbitrary waveform generator function.
The Dual ARB Player provides a status register to show the status of the following items:
• Dual ARB state (off or on)
• Trigger arming
• Waveform play–back
• Multiple BBG synchronization
To use the register, see
*RST 0
Key Entry ARB Off On
Agilent X-Series Signal Generators SCPI Command Reference
":REGister[:STATus]" on page
Dual ARB Subsystem–N5172B/82B ([:SOURce]:RADio:ARB)
"File Name Variables" on page
297.
Arb Commands
13.
309