Catalog:list; Catalog:mdmod; Catalog:mtone - Agilent Technologies N5171B Command Reference Manual

Remarks Refer to

:CATalog:LIST?

Supported All Models
:MEMory:CATalog:LIST?
This query outputs a list of the list sweep files. The return data will be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name>,<file type>,<file size>"
Example Output
1818624,519962624,"LAST,LIST,122","LIST10,LIST,69"
List
Key Entry
Remarks Refer to

:CATalog:MDMod

Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:MDMod?
This command outputs a list of the arbitrary waveform multi carrier digital modulation files. The
return data will be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name,file type,file size>"
MDMOD
Key Entry
Remarks Refer to

:CATalog:MTONe

Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:MTONe?
This command outputs a list of the arbitrary waveform multitone files. The return data will be in the
following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name,file type,file size>"
Agilent X-Series Signal Generators SCPI Command Reference
File Name Variables for information on the file name syntax.
"File Name Variables" on page 13
"File Name Variables" on page 13
Memory Subsystem (:MEMory)
for information on the file name syntax.
for information on the file name syntax.
System Commands
119