Trigger:external:source; Trigger:internal:source - Agilent Technologies N5171B Command Reference Manual

:TRIGger:EXTernal:SOURce

Supported All
:TRIGger:EXTernal:SOURce TRIGger[1]|TRIGger2|PULSe
:TRIGger:EXTernal:SOURce?
This command selects the external trigger source. With external triggering, the selected bi- directional
BNC is configured as an input.
TRIGger1 This choice selects the TRIG 1 BNC as the external trigger source for triggering
sweep, point and function generator sweeps.
TRIGger2 This choice selects the TRIG 2 BNC as the external trigger source for triggering
sweep, point and function generator sweeps.
PULSe This choice selects the PULSE BNC as the external trigger source for triggering
sweep, point and function generator sweeps.
Example
:TRIG:EXT:SOUR PULS
The preceding example sets the external trigger source to the PULSE BNC.
*RST TRIGger1
Key Entry Trigger 1

:TRIGger:INTernal:SOURce

Supported All
:TRIGger:INTernal:SOURce PVIDeo|PSYNc
:TRIGger:INTernal:SOURce?
This command selects the internal trigger source.
PVIDeo This choice selects Pulse Video as the internal trigger source for triggering sweep,
point and function generator sweeps.
PSYNc This choice selects Pulse Sync as the internal trigger source for triggering sweep,
point and function generator sweeps.
Example
:TRIG:INT:SOUR PVID
The preceding example sets the internal trigger source to Pulse Video.
*RST PSYN
Pulse Video
Key Entry
Agilent X-Series Signal Generators SCPI Command Reference
Trigger 2 Pulse
Pulse Sync
System Commands
Trigger Subsystem
189