Memory Subsystem (:Memory); Catalog:binary; Catalog:bit; Catalog:dmod - Agilent Technologies N5171B Command Reference Manual

Memory Subsystem (:MEMory)

:CATalog:BINary?

Supported
All Models
:MEMory:CATalog:BINary?
This query outputs a list of the binary files. The return data will be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name>,<file type>,<file size>"
Example Output
1818624,519962624,"GEN_FILE11,BIN,5"
Key Entry Binary
Remarks Refer to

:CATalog:BIT

Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:BIT?
This command outputs a list of the bit files. The return data will be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name,file type,file size>"
Bit
Key Entry
Refer to
Remarks

:CATalog:DMOD

Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:DMOD?
This command outputs a list of the arbitrary waveform digital modulation files. The return data will
be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name,file type,file size>"
Agilent X-Series Signal Generators SCPI Command Reference
"File Name Variables" on page 13
"File Name Variables" on page 13
Memory Subsystem (:MEMory)
for information on the file name syntax.
for information on the file name syntax.
System Commands
117