Ssaver:mode; Ssaver:state; Time; Version - Agilent Technologies N5171B Command Reference Manual

:SSAVer:MODE

Supported All
:SYSTem:SSAVer:MODE LIGHt|TEXT
:SYSTem:SSAVer:MODE?
This command toggles the screen saver mode between light only or light and text.
LIGHt This choice enables only the light to turn off during the screen saver operation
while leaving the text visible on the darkened screen.
TEXT This choice enables both the display light and text to turn off during the screen
saver operation.
Screen Saver Mode
Key Entry
Remarks The setting enabled by this command is not affected by signal generator power–on,
preset, or *RST.

:SSAVer:STATe

Supported All
:SYSTem:SSAVer:STATe ON|OFF|1|0
:SYSTem:SSAVer:STATe?
This command enables or disables the display screen saver.
Screen Saver Off On
Key Entry
Remarks The setting enabled by this command is not affected by signal generator power–on,
preset, or *RST.

:TIME

Supported All
:SYSTem:TIME <hour>,<minute>,<second>
:SYSTem:TIME?
This command sets the time displayed in the lower right area of the signal generator's display.
Range <hour>: 0 to 23
Time/Date
Key Entry

:VERSion

Supported All
:SYSTem:VERSion?
This command returns the SCPI version number with which the signal generator complies.
Agilent X-Series Signal Generators SCPI Command Reference
<minute>: 0 to 59
System Subsystem (:SYSTem)
<second>: 0 to 59
System Commands
187